Loading...
YZF-R7 22-24 CAMSHAFT KIT ST-2M
YZF-R7 22-24 CAMSHAFT KIT ST-2M
YZF-R7 22-24 CAMSHAFT KIT ST-2M
YZF-R7 22-24 CAMSHAFT KIT ST-2M
Product image 1YZF-R7 22-24 CAMSHAFT KIT ST-2M
Product image 2YZF-R7 22-24 CAMSHAFT KIT ST-2M
Product image 3YZF-R7 22-24 CAMSHAFT KIT ST-2M
Product image 4YZF-R7 22-24 CAMSHAFT KIT ST-2M

*Product may vary by application

YZF-R7 22-24 CAMSHAFT KIT ST-2M

SKU: 700XX137200


Regular price $938.00


Race Series


3 left in stock


(Payment Options Available at Check Out)

Same day shipping on In Stock items placed Mon-Fri by 1:00 pm PST.

By filling out the form below you acknowledge that the item being purchased is for racing only and this vehicle will never be used on public roads or land.

FOR CLOSED COURSE COMPETITION ONLY; NOT INTENDED FOR STREET USE

The product that you are purchasing is designed and intended for closed course competition use only and is labeled as such, i.e. Yoshimura "RACE SERIES." Yoshimura RACE SERIES products are neither designed nor intended for use on PUBLIC ROADS or LAND. Such use is prohibited by Federal and State regulations.

I have read, understood, and agree to the Use Restriction Terms.


0%
Financing

FREE SHIPPING
over $100

1-YEAR
Warranty

Repair Services
Available

MADE IN USA

Emissions Compliance Declaration: QUALIFIED MANUFACTURER DECLARED "MODIFIED PART"


WARNING: Cancer and Reproductive harm - www.p65warnings.ca.gov


Camshafts are the heart of any engine and is where tuning started for us. In 1954 Pop Yoshimura was grinding cams by hand. A lot of time has passed since then, one thing has not...passion. Today, Yoshimura cams are created in Japan from a special steel alloy billet and is just what the CP2 engine needs to make more grunt.

Product Details:

  • Full billet intake and exhaust cam, made by Yoshimura Japan
  • Full billet construction offers increase durability and quality over OEM or regrind options
  • Intake lift 9.70mm / duration 252 degrees
  • Exhaust lift 8.40mm / duration 248 degrees
  • Includes matching set of valve springs
  • Uses OEM cam sprockets
  • NOT decomp compatible, may require high power lithium battery for easy starting
  • Requires aftermarket pistons for increased valve lift
  • Legal for use in MotoAmerica Twins Cup

Installer should be familiar with engine building, these are not drop in replacement! Cams must be degreed during installation.

 

. . . . .

This product was designed to fit on a standard equipped motorcycle, as delivered from the factory. OE and aftermarket accessories not found on a bike as delivered from the factory may not be compatible with this product.

Attention international customers: This product was designed and tested to be compatible with vehicles in the U.S. marketplace only. Compatibility, including fitment and performance, may vary by marketplace.

Vehicle Fitment

Open tab
  • Yamaha YZF R7 2022
  • Yamaha YZF R7 2023
  • Yamaha YZF R7 2024
  • Yamaha YZF R7 Kit 2022
  • Yamaha YZF R7 Kit 2023
  • Yamaha YZF R7 Kit 2024


  • Close (esc)

    Free Shipping

    Free Ground Shipping on Web Orders over $75.00

    *48 Contiguous States

    Age verification

    By clicking enter you are verifying that you are old enough to consume alcohol.

    Search

    Shopping Cart

    Your cart is currently empty.
    Shop now

    Race series product restriction and affirmation

    Warning:

    The RACE SERIES product you are purchasing removes, renders inoperative, or bypasses required elements of the emission control systems of EPA, certified motorcycles of motorcyle engines and may only be installed on motorcycles that are restricted to closed course competition. Installation of this product on a motorcyle that is ridden on a public street, highway, or public lands violates the tampering and defeat device provisions of the Clean Air Act & 203(a)(3)(A) and/or & 203(a)(3)(B) and may subject you to a civil penalty of up to $37,000.

    Information (Enter as Applicable)

    Race Information

    Rider/Purchaser Information

    Affirmation

    By clicking below, I affirm:
    1. that i have read the above warning;
    2. that any information I have entered is accurate; and
    3. that any motorcycle on which I install the RACE SERIES product will be restricted to closed course competition and will not be ridden on any public street, highway or public lands.