*Product may vary by application
Emissions Compliance Declaration: QUALIFIED MANUFACTURER DECLARED "MODIFIED PART"
WARNING: Cancer and Reproductive harm - www.p65warnings.ca.gov
PRE-ORDER: SHIPPING END OF JUNE!
The new Suzuki 800 twin platform produces quite a punch for a parallel twin! For the racer with this machine headed to the track, we developed a system that brings out the best in sound and performance for the GSX-8R and S models.
The R&D team dug deep on this one… Our AT2 Race Series Works Finish full system with carbon fiber heel guard was developed to optimize the power on the new 776cc, 270 degree engine and the results were astounding! Adding a Max HP of 5.7%, and a torque gain of 6.1 percent, this is a different motorcycle now! On top of great results on the dyno, the weight saving of over 7 pounds is very substantial and there's no mistaking the sound of a Yoshimura system delivering a sonic tone that does not disappoint!
It's time to bring the Suzuki GSX-8R/S to the track!
There is also an optional Low Volume Insert INS-20-K for this full system and our Aluminum Muffler bracket kit 200BG117200.
Yoshimura's AT2 is proudly designed, developed and manufactured in Chino, California.
|
System Configuration |
Sound Levels (SAE J2825) |
Weight |
|
|
2000 rpm |
5000 rpm |
||
|
Speed Series AT2 Full System Open |
97.5 dB |
103.8 dB |
10.2 lbs |
|
Speed Series AT2 Full System w/Insert |
90.3 d |
101.3 dB |
10.1 lbs |
|
Stock |
78.5 dB |
89.1 dB |
17.3 lbs |
. . . . .
This product was designed to fit on a standard equipped motorcycle, as delivered from the factory. OE and aftermarket accessories not found on a bike as delivered from the factory may not be compatible with this product.
Attention international customers: This product was designed and tested to be compatible with vehicles in the U.S. marketplace only. Compatibility, including fitment and performance, may vary by marketplace.
Race Series Exhaust System
FOR CLOSED COURSE COMPETITION ONLY; NOT INTENDED FOR STREET USE
If you're looking for that competitive edge, look no further than our Race Series. These exhaust systems are designed with nothing but power in mind. Each Race Series system is developed in accordance with noise compliance regulations imposed by most racing sanctioning bodies worldwide.
Works Finish Explained
New Yoshimura Works Finish takes on a unique coloring after it goes through a heat cycle on the motorcycle that looks much like those titanium works components our factory racers use.
- Contemporary Satin/matte finish
- Uniform heat coloration
- Increased fatigue strength
- Increased scratch and stain resistance