*Product may vary by application
Emissions Compliance Declaration: QUALIFIED MANUFACTURER DECLARED "MODIFIED PART"
WARNING: Cancer and Reproductive harm - www.p65warnings.ca.gov
*Shown with optional Aluminum Muffler Bracket
The new Suzuki 800 twin platform packs quite a punch for a parallel twin! Yoshimura brings you the uncompromising power of our Speed Series 49 state friendly system for the new GSX-8R/S.
Our engineers knocked it out of the park on this one! The product of months or development, an AT2 Speed Series Works Finish full system with a carbon fiber heel guard and packed with some impressive new power for the new 776cc, 270-degree engine… the results are astounding! The new Suzuki system comes to life on the dyno adding a Max HP of 5.7% paired with a torque gain of 6.1 percent. As if all the new power wasn’t enough, the new Speed Series system even manages to trim a whopping 6.5lbs of weight over the stock unit. There's no mistaking the signature Yoshimura sound and a GSX-8S/R equipped with this new 49-state friendly system delivers a sonic tone that does not disappoint!
Also available as an option for this full system is our Low Volume Insert INS-20-K and our Aluminum Muffler bracket kit 200BG117200.
Yoshimura's AT2 is proudly designed, developed and manufactured in Chino, California.
System Configuration |
Sound Levels (SAE J2825) |
Weight |
|
2000 rpm |
5000 rpm |
||
Speed Series AT2 Full System Open |
96.8 dB |
103.3 dB |
10.8 lbs |
Speed Series AT2 Full System w/Insert |
88.1 dB |
99.1 dB |
10.9 lbs |
Stock |
78.5 dB |
89.1 dB |
17.3 lbs |
. . . . .
This product was designed to fit on a standard equipped motorcycle, as delivered from the factory. OE and aftermarket accessories not found on a bike as delivered from the factory may not be compatible with this product.
Attention international customers: This product was designed and tested to be compatible with vehicles in the U.S. marketplace only. Compatibility, including fitment and performance, may vary by marketplace.
Works Finish Explained
New Yoshimura Works Finish takes on a unique coloring after it goes through a heat cycle on the motorcycle that looks much like those titanium works components our factory racers use.
- Contemporary Satin/matte finish
- Uniform heat coloration
- Increased fatigue strength
- Increased scratch and stain resistance