*Product may vary by application
WARNING: Cancer and Reproductive harm - www.p65warnings.ca.gov
Description
New for the CB750 Hornet, our V2 Fender Eliminator Kits are redesigned from the ground up with the concept of enabling you to choose only the accessories that YOU want.
The kit starts off with a redesigned base which includes model specific plug and play wiring. No more splicing wires for the install on this new kit! Also, this new kit features integrated fasteners that eliminates almost half of the hardware, and eliminates the need to hold a nut with a second wrench for that final torque. As a bonus, we are even throwing in an OEM turn signal bracket at no additional cost.
Updated base design includes:
- Plug and Play, LED License Plate Light housing
- Manufactured using powder-coated stainless steel and aluminum materials
- Includes all stainless-steel hardware
- Integrated fasteners (to eliminate the need for a third hand)
- OEM turn signal bracket to remount and tuck in your stock signals
- Made in Chino Ca. USA
Add your optional accessories as you want!
LED Signal Kit for V2 FE Kits
These kits include Yoshimura LED Signals and include a mounting bracket, plug & play wiring adapters and a relay matched to your bike for easy installation.
New Micro Signal Kit for V2 FE Kits
A sleek minimalist lighting option for your V2 FE Kit. This kit includes Yoshimura Micro Signals, a mounting bracket, plus a relay matched to your bike. This kit does require to cut & splice for installation as there is no plug & play option available at this time.
License Plate Frame
If there ever was a Factory Racing license plate frame, this would be it. Made of aircraft grade aluminum, stamped then anodized then silk screened with one of the most successful motorcycle racing brands in the world. This is how you represent.
Works Titanium Bolts for license plate
Made in USA from a prominent titanium bolt manufacture, these bolts will add style and class to your license plate. 3 colors to choose from.
There you have it; Now you can build your own Fender Eliminator Kit how YOU want it, all with nothing left in your tool box you don't need! All proudly made in the USA in Chino, Ca.
. . . . .
This product was designed to fit on a standard equipped motorcycle, as delivered from the factory. OE and aftermarket accessories not found on a bike as delivered from the factory may not be compatible with this product.
Attention international customers: This product was designed and tested to be compatible with vehicles in the U.S. marketplace only. Compatibility, including fitment and performance, may vary by marketplace.
Instructions / What's Included PDFCustomer Reviews
This tail tidy was easy to install and seems to be built really well. The plug and play license plate light makes this thing a no brainer.
Perfect!
High quality product, great led license plate light, would have liked some better instructions for the OEM lights bracket and install. Happy with the look and product.
V2 Tail Tidy: Elegant, minimalist and solidly built
This reviews the 2025 Honda CB750 Hornet V2 Fender Eliminator Kit with the OEM Turn Signal Bracket. I can honestly say this seemingly "simple" tail tidy is a wonderful piece of design/ engineering and quality manufacturing; it's an elegant, smart, minimalist, thoughtful design. It saves about 2 bs. in weight over the OEM rear bracket assembly (reusing the OEM turn signals). Some highlights:
1. The main support bracket is made out of steel (laser-cut) that bolts directly to to the bottom recess of the rear fender under tray (without the need for additional stand-offs or spacers). The fit is tight and sturdy and kept to a very low profile. The bracket also has pre-installed PEM nuts for convenient assembly for the turn signal bracket and license plate bracket.
2. The License Plate Light is a wide, 6 LED unit that comes wired with the Honda connector, truly plug and play.
3. The OEM Turn Signal Bracket is laser-cut in aluminum, made to fit the Honda factory LED turn signals. Please note that installing the elliptical OEM Honda rubber turn signal mounts is a very difficult task and will require finger strength and patience. The very tight press fit can be helped using some liquid soap and compressing the rubber mount.
4. The License Plate Bracket is laser-cut in thick aluminum with counter sunk mounting holes and pre-installed PEM nuts for the license plate.
5. Most of the hardware are a high quality stainless steel and everything fits.
6. The brackets are all very nicely finished in a matte black, the assembly looks great when installed. The rear turn signals are properly aligned and the license plate well lit and visible.
There are tons of tail tidy manufacturers out there for this bike, most of them are pretty klunky and not very well designed or executed; please survey them and make your own conclusions. I'm very impressed with the Yoshimura V2, although a bit pricey, t's simply elegant!
This reviews the 2025 Honda CB750 Hornet V2 Fender Eliminator Kit with the OEM Turn Signal Bracket.
I can honestly say this seemingly "simple" tail tidy is a wonderful piece of design/ engineering and quality manufacturing; it's an elegant, smart, minimalist, thoughtful design.
1. The main support bracket is made out of steel (laser-cut) that bolts directly to to the bottom recess of the rear fender under tray (without the need for additional stand-offs or spacers). The fit is tight and sturdy and kept to a very low profile. The bracket also has pre-installed PEM nuts for convenient assembly for the turn signal bracket and license plate bracket.
2. The License Plate Light is a wide, 6 LED unit that comes wired with the Honda connector, truly plug and play.
3. The OEM Turn Signal Bracket is laser-cut in aluminum, made to fit the Honda factory LED turn signals. Please note that installing the elliptical OEM Honda rubber turn signal mounts is a very difficult task and will require finger strength and patience. The very tight press fit can be helped using some liquid soap and compressing the rubber mount.
4. The License Plate Bracket is laser-cut in thick aluminum with counter sunk mounting holes and pre-installed PEM nuts for the license plate.
5. Most of the hardware are a high quality stainless steel and everything fits.
6. The brackets are all very nicely finished in a matte black, the assembly looks great when installed. The rear turn signals are properly aligned and the license plate well lit and visible.
There are tons of tail tidy manufacturers out there for this bike, most of them are pretty klunky and not very well designed or executed; please survey them and make your own conclusions.
I'm very impressed with the Yoshimura V2, it's simply elegant!